Bugus Monkey's new and improved puzzle basement and various ramblings

AC Infinity
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That is weird that the two of you are having issues popping seeds. Are they from the same vendor(I hesitate to use the term breeder anymore as it seems that tide turned when legalization went into overdrive)? Are the seeds old and how do you store them? I store mine in the fridge with some of those desiccant packs. I haven’t popped any of my 2019 seeds recently but other people have and they seem to be viable and vigorous. I wonder if vendors store seeds in a freezer. I know some cannabis seeds will survive freezing since my neighbor had some volunteers pop up this year that had overwintered in her yard.
 
I keep them at room temperature in low humidity, and have popped some from 2020 not that long ago. The GDPA and SF seeds were from plants I pollinated and for sure the SF seeds have been troublesome in the past, but not the GDPA. I also had some tomato and pepper seeds leftover from seeds I started in the spring, and they didn't pop either.

Putting them in the fridge is for reducing humidity? I considered it when I read that others did it, but I wondered if the heating and cooling of the defrosting process would be harmful.
 
Bugus_Monkey said:
Puzzling, I haven't had a problem basically ever. I am going to try scuffing some seeds also. Do the edge where the separate, or just right on the side of them? Strange how it seems to have happened all at once.
Click to expand...
I do the edges. I'm not sure if the goal is to open the seams for water to get in, or to weaken the shell to let the sprout out. With the stubborn SF seeds my experience is they need to sink in water over a couple of hours, or they need more sanding.
 
CrashMagnet said:
I keep them at room temperature in low humidity, and have popped some from 2020 not that long ago. The GDPA and SF seeds were from plants I pollinated and for sure the SF seeds have been troublesome in the past, but not the GDPA. I also had some tomato and pepper seeds leftover from seeds I started in the spring, and they didn't pop either.

Putting them in the fridge is for reducing humidity? I considered it when I read that others did it, but I wondered if the heating and cooling of the defrosting process would be harmful.
Click to expand...
I put them in the fridge just because I figured it would slow down any degradation. Might not though. I make sure they are good and dry before storing them by storing them in sealed containers with those desiccant packs for some random period of time😂(probably not really making sure they are good and dry-just assuming they are).
 
Bugus_Monkey said:
Puzzling, I haven't had a problem basically ever. I am going to try scuffing some seeds also. Do the edge where they separate, or just right on the side of them? Strange how it seems to have happened all at once.
Click to expand...
I have heard of people lining a matchbox with fine sandpaper and shaking the seeds in the matchbox to weaken the seed covering. I haven’t tried it though.
 
2 in the back are permanent markers. Not happy with how they started. Only 2 of the 10 that made it. 3 others are from Carty: 1 blue berry pancakes and the other 2 are chocolate thai and I had no problem what so ever with germination or transplant. Chiller seems to be working great. Long long way to go. So far so good. Let's see what I can F.U first. hahaha.
 

Attachments

  • 20Sep24.jpeg
    20Sep24.jpeg
    943.4 KB
Bugus_Monkey said:
2 in the back are permanent markers. Not happy with how they started. Only 2 of the 10 that made it. 3 others are from Carty: 1 blue berry pancakes and the other 2 are chocolate thai and I had no problem what so ever with germination or transplant. Chiller seems to be working great. Long long way to go. So far so good. Let's see what I can F.U first. hahaha.
Click to expand...
Good to see ya back up and running.
 
I said I was going to sit out summer because of my set up, mainly the drying part. The area I have to dry is a different building and a perfect 60/60 during the wintertime. Cost to much to keep it cool during the summer. But really, between family and everything we had going mid summer, I didn't sit it out on purpose. Still got plenty of stash from last run. Them grove bags Jan and I chatted about a while back had to be knock-off junk as the zipper has ripped out of the big one. Now, If I can just remember which grow shop I purchased them from. (What else) ... I should be able to hang this week coming up early in the day. Been an extremely busy summer at real work... Seems like I made some minor changes in the grow room when I put the chiller in.... Here is a tip I guess.... If you are going to personally build your own grow room with in a stick built building... regardless of how big you think you are going to need it, add about 16 extra inches in all directions, AND add at least 4 to 6 extra receptacles. We have plenty of breaker space and the electrical box had expansion in mind to allow for a pool pump which we later decided to wire a different way. Ya... Smoke another one, I'm a little buzzed up this AM with a heck of a honey do list for the weekend.
 
I cracked beans from 2016 the C99 3 out of 5 popped. They were and are being kept in the fridge. I moved mine to the fridge about 6 month ago. Never had to worry about if until I started collecting thru trades
 
Hard to keep track of this stuff with out a notebook or a page such as this. 3 weeks of 12/12 in the books. Chiller is working great, so far. hard to dial it in at exactly 68, been running 67.8... Go figure. Switched to feeding under rather than on top. Of the 5 plants only 2 of those permanent markers survived, one is a GDP and the other 2 are from @Carty , Chocolate Thai, but are not Autos. Long long long way to go. Sort of glad I did not go with a mid summer crop, I'll play with temps in the hopes of playing with colors at the end. I'll be back. Should be able to hang a couple mornings this week.
 
I had an outdoors friend give me a nice fresh handful of something he called Blueberry Mookie ... Anyways, it sure tastes like the blueberry's and really gets you HAF. Almost to the point that I want to yank this current run and restart from scratch. I personally have had great luck with BF a time or 2 now. Been a while since I ran with them. It was just before I joined here and was some shizz called BF LSD. It was really good stuff.
 

Attachments

  • BF-459.jpeg
    BF-459.jpeg
    946 KB
Bugus_Monkey said:
I had an outdoors friend give me a nice fresh handful of something he called Blueberry Mookie ... Anyways, it sure tastes like the blueberry's and really gets you HAF. Almost to the point that I want to yank this current run and restart from scratch. I personally have had great luck with BF a time or 2 now. Been a while since I ran with them. It was just before I joined here and was some shizz called BF LSD. It was really good stuff.
Click to expand...
Those look great
 
Woo Hoo - New little weed shots for the week.
One smells like grapes when you rub up against it. The permanent markers to me - at this point - smell sort of like fresh cut 2 by 4's from the lumber yard,. Best way I can describe it. Weird, maybe. - Long way to go - Let's see what I can F-up first. hahaha. Hopefully nothing.
 

Attachments

  • nov9f.jpeg
    nov9f.jpeg
    666.1 KB
  • nov9e.jpeg
    nov9e.jpeg
    685.3 KB
  • nov9d.jpeg
    nov9d.jpeg
    559.4 KB
  • Nov9c.jpeg
    Nov9c.jpeg
    725.1 KB
  • Nov9b.jpeg
    Nov9b.jpeg
    785.9 KB
  • Nov9a.jpeg
    Nov9a.jpeg
    869.4 KB
Picts. Changed Res. The chiller sure seems to have helped stabilize the PH once I get it down where I like it. Window/wall unit seems to be giving me a little trouble.

The Work Pump Saga... I did get the old one (1960's edition) back up and running today. Basically it's silent compared to the new one.. The newfangled modern age one will get tore down tomorrow - Hopefully - hahahaha... - I still have a 1940's version for worst case scenario back up and maybe I can steal some parts off of it. And I double promise, cross my fingers, I will get some picts up of that project once I get into it.

Any c3 or c4 owners on here?
 

Attachments

  • Nov14c.jpeg
    Nov14c.jpeg
    721.3 KB
  • Nov14b.jpeg
    Nov14b.jpeg
    786.3 KB
  • Nov14a.jpeg
    Nov14a.jpeg
    873.5 KB
Last edited:
You must log in or register to reply here.

Similar threads

C
Rapid die off at day 35 of flower... desperate for help
2
Replies
23
Views
4K
pute
pute

Latest posts

Back
Top