Rickarilla indoor grow

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rickarilla

Member
Joined
Jun 20, 2024
Messages
13
Reaction score
64
Location
Usa
I am using an ac infinity 3x3 grow tent package.

I picked up 4 clones at the dispensary today. I have 2 airheads and 2 Pablo's revenge. I have transplanted them into 5 gallon fabric pots in ffof soil.

Currently have my led 18 inches from the top and my light on 50%. I will run my lights on 24/7 for a few days then move to a 18/6 schedule.

I need to read up and watch some videos to learn how to set this controller up properly. I'm open to any tips and suggestions.
 

Attachments

  • 20240928_215924.jpg
    20240928_215924.jpg
    6.5 MB
  • Screenshot_20240928_225428_AC Infinity.jpg
    Screenshot_20240928_225428_AC Infinity.jpg
    143.9 KB
Looks like you’re off to a good start. 4 plants in a 3x3 might get pretty crowded though in my opinion. Also do you have an air intake in there. You want good ventilation. I usually draw fresh air from the bottom of my tent and draw air from the top with the exhaust fan.
 
I originally only planned to do 3 but
Looks like you’re off to a good start. 4 plants in a 3x3 might get pretty crowded though in my opinion. Also do you have an air intake in there. You want good ventilation. I usually draw fresh air from the bottom of my tent and draw air from the top with the exhaust fan.
I probably should of only went with 3, but I will do a shorter veg for this grow. I have a 6" fan and filter up top.
 

Attachments

  • 20240929_005252.jpg
    20240929_005252.jpg
    6.2 MB
I originally only planned to do 3 but

I probably should have only went with 3, but I will do a shorter veg for this grow. I have a 6" fan and filter up top.
I run 4 in the same tent setup. Usually I get one “runt” as in my current grow I have three starting strong and one runt.

As for learning how to program once you see how it’s done it becomes easy. Don’t try the complex VPD stuff first just concentrate on a simple switch on or off depending on a single factor like heat or humidity
 

Latest posts

Back
Top