- Joined
- Mar 5, 2012
- Messages
- 2,754
- Reaction score
- 6,040
It gets better almost by the week. I can't believe what I see sometimesI like the one you use, nice quality
It gets better almost by the week. I can't believe what I see sometimesI like the one you use, nice quality
Make a thread on AI artworkIt gets better almost by the week. I can't believe what I see sometimes
Thread 'Ask AI anything.....' Ask AI anything.....Make a thread on AI artwork
would love to follow
I feel l the same way bro.........
Nothing like doing the 60 cycle shuffle to learn a valuable lesson.my older brothers got me with this , “ hey , stick your finger in this lightbulb socket”…
I never fell for the fork in the wall socket after that
Ladies and gentlemen, esteemed colleagues and distinguished guests, I am honored today to present to you the groundbreaking advancements in the field of quantum defibrillation and their practical implications on our new and improved Hyperbolic Tetra-Modulator (HTM).
Now, the primary operating principles of the HTM are based on the phase-decoupled oscillatory motions of bipolar neutron pulses. By harnessing the spontaneous perturbations in the sub-ionic resonation matrix, the device achieves a non-linear compression of spatial-temporal wavefronts, leading to an enhanced tri-axial superposition alignment.
One of the most intriguing aspects of the HTM is its internally geometric Retromorphic Translation System (RTS). This system deploys an array of multi-dimensional polyphasic conduits, each individually calibrated to resonate at a distinct supra-luminal frequency. This not only ensures that the harmonic flux distribution remains constant across all modalities but also provides a direct feedback loop to the central tri-coil vortex stabilizer.
We've also innovated in the realm of crypto-fluid dynamics, integrating a Hexagonal Entropic Amplification Resonator (HEAR). When synchronized with the tetra-modulated pulses, the HEAR produces an oscillatory anti-phase pattern, reducing the meta-entropic losses and effectively doubling the energy conversion efficiency of the device.
Now, to address the issue of thermionic emission interference - a primary concern with devices of this magnitude - our team has incorporated a Dual-layered Inertial Quark Shield (DIQS). The DIQS, while minimizing the radial gamma photon dispersions, also serves as a protective barrier against any potential reverse osmotic pressure fluctuations, ensuring an uninterrupted operation of the HTM.
In conclusion, the Hyperbolic Tetra-Modulator promises to revolutionize the way we perceive and interact with hyper-dimensional quantum fields. The combination of cutting-edge design, unparalleled efficiency, and groundbreaking technology makes it a beacon of modern engineering. I thank you all for your time and look forward to the era of quantum leaps and bounds this innovation promises to usher in.
Nothing like doing the 60 cycle shuffle to learn a valuable lesson.
Here he is at hobby lobby.I too got to call him Oppy he really enjoyed that nick name.
WTF are you boys working on? its growin weed ! not moon walk schite!I'm guessing it's for a turbo encabulator
That is a explanation on how Unc Walt gets high with his volcano in so many wordsLadies and gentlemen, esteemed colleagues and distinguished guests, I am honored today to present to you the groundbreaking advancements in the field of quantum defibrillation and their practical implications on our new and improved Hyperbolic Tetra-Modulator (HTM).
Now, the primary operating principles of the HTM are based on the phase-decoupled oscillatory motions of bipolar neutron pulses. By harnessing the spontaneous perturbations in the sub-ionic resonation matrix, the device achieves a non-linear compression of spatial-temporal wavefronts, leading to an enhanced tri-axial superposition alignment.
One of the most intriguing aspects of the HTM is its internally geometric Retromorphic Translation System (RTS). This system deploys an array of multi-dimensional polyphasic conduits, each individually calibrated to resonate at a distinct supra-luminal frequency. This not only ensures that the harmonic flux distribution remains constant across all modalities but also provides a direct feedback loop to the central tri-coil vortex stabilizer.
We've also innovated in the realm of crypto-fluid dynamics, integrating a Hexagonal Entropic Amplification Resonator (HEAR). When synchronized with the tetra-modulated pulses, the HEAR produces an oscillatory anti-phase pattern, reducing the meta-entropic losses and effectively doubling the energy conversion efficiency of the device.
Now, to address the issue of thermionic emission interference - a primary concern with devices of this magnitude - our team has incorporated a Dual-layered Inertial Quark Shield (DIQS). The DIQS, while minimizing the radial gamma photon dispersions, also serves as a protective barrier against any potential reverse osmotic pressure fluctuations, ensuring an uninterrupted operation of the HTM.
In conclusion, the Hyperbolic Tetra-Modulator promises to revolutionize the way we perceive and interact with hyper-dimensional quantum fields. The combination of cutting-edge design, unparalleled efficiency, and groundbreaking technology makes it a beacon of modern engineering. I thank you all for your time and look forward to the era of quantum leaps and bounds this innovation promises to usher in.
Connected the two sides of a CNC system capacitor about the size of a 1 liter bottle(not on purpose obviously) and hot launched thru the air(I assume my leg muscles contracted pretty violently) about 10 or 15 feet(a wall stopped me). When I came to, this old guy was doubled over laughing his *** off at me. He was a VP in the company(and a pretty down to earth(no, not an electric joke) man but I am thinking he may have been laughing a bit out of nervousness. Probably glad he didn’t have to dispose of my body…Worst hit I ever took was on the job, right arm touched the neutral side of 220V 30Amp 3 phase while my right arm touched a 4" copper water pipe. Knocked me clean off the scaffold. Don't remember hitting the ground. Woke up with morons holding me down every time I tried to get up. I landed in a water puddle and wanted to get out of it. They already had a meat waggon heading for the job, and as soon as I could talk again and be understood, I demanded they cancel the run. Took 15 minutes or so to get my frog back in the race, but I finished the day. I was praying the spark jumper that left an energized line exposed like that would show up so I could deal with him like any construction worker would do.
getting caught in between a neutral causes major shrinkage quicklyWorst hit I ever took was on the job, right arm touched the neutral side of 220V 30Amp 3 phase while my right arm touched a 4" copper water pipe. Knocked me clean off the scaffold. Don't remember hitting the ground. Woke up with morons holding me down every time I tried to get up. I landed in a water puddle and wanted to get out of it. They already had a meat waggon heading for the job, and as soon as I could talk again and be understood, I demanded they cancel the run. Took 15 minutes or so to get my frog back in the race, but I finished the day. I was praying the spark jumper that left an energized line exposed like that would show up so I could deal with him like any construction worker would do.
Enter your email address to join: