papabeach1
Well-Known Member
- Joined
- Jul 10, 2008
- Messages
- 2,081
- Reaction score
- 1,211
yeah...I know.. not again 2-cent!! but it's my first time to try that vaporizer I have never tried it until yesterday... one of friend told me about the vaporizer.. I thought he talks about butane and the plastic bag like in the DIY forum.. just that I can't do that while I'm driving truck or boat.. people can say oh YOU!! I see you smokin the vaporizer!! I didn't want that... but the friend showed me on youtube... I took a look at it.. its pretty simple I don't have to post pic cuz youtube has lot of it showing in the video... just try type at the search box of youtube..."glass blub vaporizer" it will show you plently of methods to do so.. but what I did was
use the steak knife and cut the end of twist on glass blub.. took the cap of that twist off... I saw the inside glass still there along with wires (inside the glass) I decide to careful use the screw driver and towel.. I laid the towel down the table... carefully use the screw driver inserted inside the glass and give a little bend (cracked the inside glasses) perfect.. the outside of glasses didn't cracked at all.. I cleaned it out... now I have empty glass with little cap end off...
then I took the cap off from 2 liter bottle.. and drilled the 7/16 not any bigger than that cuz I want tighter hole to put 1/2 inch tube in... done..
I added the black tape to the twist part of glass blub... just for "air tighten"
then I added some resins in the blub... and put the twist cap on... and used the candle to burn the glass blub... it work...
it taste good at first.. then later on it taste bad.... what went wrong I did?
its my first time.. pretty intz to me!! any good suggests? :hubba: it actually taste funny after that.. what I did wrong? did I made some fuel out of hash? or what?
use the steak knife and cut the end of twist on glass blub.. took the cap of that twist off... I saw the inside glass still there along with wires (inside the glass) I decide to careful use the screw driver and towel.. I laid the towel down the table... carefully use the screw driver inserted inside the glass and give a little bend (cracked the inside glasses) perfect.. the outside of glasses didn't cracked at all.. I cleaned it out... now I have empty glass with little cap end off...
then I took the cap off from 2 liter bottle.. and drilled the 7/16 not any bigger than that cuz I want tighter hole to put 1/2 inch tube in... done..
I added the black tape to the twist part of glass blub... just for "air tighten"
then I added some resins in the blub... and put the twist cap on... and used the candle to burn the glass blub... it work...
it taste good at first.. then later on it taste bad.... what went wrong I did?
its my first time.. pretty intz to me!! any good suggests? :hubba: it actually taste funny after that.. what I did wrong? did I made some fuel out of hash? or what?