The Original Old Farts Club

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
My Boy (woof type) woke me up at 4am to let me know one of his dew claws has now grown into the ped from where it grows (bleeding ) he was like all scared . So after an hr calming him I see I need to visit Vet and have it clipped and cleaned now.
Poor guy doesn't have a clue
Like this
1633176900672.png
 
Last edited by a moderator:
so anybody here adept in making a salve? I pulled the oil out of some old buds using acetone solvent. Evaporated the excess off and I’m left with thick oily greenish brown crap that’s quite potent. Yes I tried the sheet. Put around 100 mg in a capsule and proceeded to get messed up. Really messed up! Wouldn’t want to try smoking it tho. I soaked it way too long for it to become shatter or wax. I have some beeswax and need a couple of pointers on what else to use. I do have peppermint and lavender essential oil’s to throw in.
 
so anybody here adept in making a salve? I pulled the oil out of some old buds using acetone solvent. Evaporated the excess off and I’m left with thick oily greenish brown crap that’s quite potent. Yes I tried the sheet. Put around 100 mg in a capsule and proceeded to get messed up. Really messed up! Wouldn’t want to try smoking it tho. I soaked it way too long for it to become shatter or wax. I have some beeswax and need a couple of pointers on what else to use. I do have peppermint and lavender essential oil’s to throw in.
Piece of cake
You will need to figure out the strength by trial and error
Unless you know the % of the THC in oil.
But you could get some good virgin coconut oil and melt it down on low heat and then add some of the oil , most likely for a topical you won't need much , again trial and error so do a small batch at 1st. Do not go over 250degs as you melt, after adding the oil mix in your beeswax (start with small amount again until you see what happens when cooled down) then add the other ingredients ,
If the balm is to thick and on hard side re-melt and add some more coco oil, and if to soft reheat and add more bees wax (you don't need to much again) Trial and error .
Once you figure out what the numbers look like after getting the right consistency make a slightly larger batch and see .
Also you can always add more THC oil to it if not strong enough
Reheat and stir in then cool.
If need be PSam is the Man...... pm him
 
So is it true that the US Gov developed LSD as a way to try and make super soldiers?
This is a false statement. It was created so that the average citizen could explore their thoughts for the other forms of life we share this planet with. Like our fascination with flying creatures. Was really a very successful program till they learned that we couldn’t land for sheet.
 
Piece of cake
You will need to figure out the strength by trial and error
Unless you know the % of the THC in oil.
But you could get some good virgin coconut oil and melt it down on low heat and then add some of the oil , most likely for a topical you won't need much , again trial and error so do a small batch at 1st. Do not go over 250degs as you melt, after adding the oil mix in your beeswax (start with small amount again until you see what happens when cooled down) then add the other ingredients ,
If the balm is to thick and on hard side re-melt and add some more coco oil, and if to soft reheat and add more bees wax (you don't need to much again) Trial and error .
Once you figure out what the numbers look like after getting the right consistency make a slightly larger batch and see .
Also you can always add more THC oil to it if not strong enough
Reheat and stir in then cool.
If need be PSam is the Man...... pm him
Thanks. I have some coconut oil on hand. I’m wondering if I can use our instant pot for this. Set it up for sous vide and put the ingredients in a water bath.
 
Last edited:

Latest posts

Back
Top