Home of the Old Fart's Club part 2

AC Infinity
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Yep Keef, I'm making the sacrifice.
I have me a tablespoon after 4pm and in 2hrs. I try to figure out why I'm so high. lol
Then I remember the oil. I end up catatonic till morning. Seems to be the only way I can sleep for more than 2hrs.
Doc won't give me no reds. :(
Modern sleep meds just make ya do lots of strange things. Got less use for chem meds every day.
 
Something I been wondering is after U make dry ice hash would there be enough THC/CBD left on the weed to make an alcohol wash for RSO worthwhile ? -- If the alcohol cost was nominal ?-- I don't know if it will be but I'll need to know !-- What I'd like to do is -- Make dry ice hash out most of what I grow -- Then put it thru a Rosen Press and fill hash oil cartridges !-- The pressed hash pucks I want to drop into a jar of alcohol !-- If the after hash extraction is worthwhile -- I'll add that to the hash pucks extraction -- That RSO plus is gonna be given free to vets !-- I also see high CBD - high CBD and high THC mix and the varieties of straight up high THC !-- When they let me work I haven't given up on "Liquid Weed" carts -- 50% hash oil in a carrier like that EJ Mix !-- 70 % hash oil cut in half should make the e-cig juice stronger than the mother weed !-- It ain't like U can sit around hitting on a hash oil cartridge and make any sense for long !-- There's a place for that but I think this Liquid Weed would allow a person to enjoy company and vape without getting turned into a Zombie !-- I mean if U wanna be a Zombie ?-- We can do that too !
 
O.K. 420 practice !-- Did I ever tell ya'll about how quick I solved that Rubic's Cube ?-- Got it in the morning and by the time the sun went down it was solved !-- With a 12 gauge !-- Dam demon possessed piece of technology !-- It felt good !
 
Keef said:
RE -- I got about 13 of those Mars Hydro and I'm using them till I wear them out and can't fix them anymore !-- The strips interest me though !-- I wonder if I could run them with the kinda drivers I got ?-- I got a couple with bad light boards but everything else is fine !
Click to expand...

I wonder if you could replace them with two of my photon phantom wavy boards let me know what model light that is and I’ll get my buddy to do some looking into it if it will work I’ll send you over a couple
 
What up Bud ?-- Cuz -- I got your PM and I'll get back with U when I got them together !-- We got unstable air from a coming storm got me swinging a little low -- My face is kinda locked up !
I got the Mars Hydro--300 watt Reflector Series !-- I been in them !-- They do not want U to get to those light boards !-- They sandwiched the light board between the sides of the Reflector panels with about 50,000 tiny little plastic screws !-- I went in after the light board and came out with it -- Dammit !-- I can use a jumper wire around the bad chip and restore the lost circuit and the chips will all work again except the one bad chip !-- They not so easy to put back together though !--
Each light got 2 little drivers that run 2 circuits each if that helps !-- I haven't had a driver go out yet !
I been thinking about those Cobb LEDs-- I figure eventually I'm have to figure something out !-- Right now I got a spare light so I got time !-- When they start blowing chips I'm use them drivers some how on something !
 
Bud -- I want to lodge a formal complaint about that Canadian Whiskey or maybe it would be better as a public service announcement !-- U can't be smoking weed and drinking that stuff while U doing electrical work !-- It will light U up !-- I don't want to talk about it !-- It is a bad memory !-- I thought I died !
 
Keef said:
Gloman I guess you'll have dispose of that RSO in the proper manner ?-- You'll have to make the sacrifice and take it yourself !-- I know U got access to high test alcohol !-- U better gear up U got until October !-- Garbage bags full of trim ?-- Got to do something with it !-- If U gonna eat it in any form just make sure it has been decarbed !-- U know all this already !-- The plants from them seed gonna be sticky !

I'm hoping to have a good rosin press by harvest. My plan is to press everything except the choice buds.
I Do have access to high proof alcohol in large quantities so Ill try soaking the pucks after pressing for RSO too.
I've made lotts of rso and found winterizing to be a BIG help. Chlorophyll is good for your blood but too much is nasty.
I'm really liking the olive and coconut oil infusions. I never dreamed you could get it to be so potent. Thought there was a saturation point that prevented it from getting too strong. I was wrong! Hehehe!
Click to expand...
 
Keef said:
Bud -- I want to lodge a formal complaint about that Canadian Whiskey or maybe it would be better as a public service announcement !-- U can't be smoking weed and drinking that stuff while U doing electrical work !-- It will light U up !-- I don't want to talk about it !-- It is a bad memory !-- I thought I died !
Click to expand...

LOL you always crack me up brother!
Stick to American made clear whiskey! And stay away from sparks! lol
 
Yo G -- I was telling RE about my coconut oil infusion the other day !-- I run several batches of weed through the same oil !-- The problem is that U get oil on your fingers so U lick it off !-- and the spoon !-- Had coconut oil smeared in my hair !-- Got some in my eye and almost got religion !-- Couldn't waste that oil in pan !-- Good thing U can't die from an over dose !-- Making coconut infused oil woulda kilt me !-- No I take the caps now !-- -- but -- U can make that stuff in the microwave !-- Take a minute or so for each batch -- strain add new weed do it again !-- Only adding what oil U have to !-- Sheet make U crazy !
I guess a resourceful fellow could wash the oil out that left over weed-- cause there will be quite a bit-- with alcohol so the oil could be filtered -- Then make alkeehol go away and now U got all infused oil back ?--
 
Gloman -- If U don't have them this is an oil handling kit !-- I have to learn the hard way but I come around !-- That Rosen Press oil stick to EVERYTHING -- Except silicone !-- You'll be needing this or something similar -- U see those little mesh bags ?-- U shake your hash then press it into pucks with a pollen press (not pictured )-- The hash go in the mesh bags then placed inside a folded piece of parchment paper !-- Then between the heat plates in the Rosen Press -- Lower the hammer with the pressure and heat and the oil come out the hash thru the mesh bag and onto the parchment paper !-- U use these tools to work it !-- See that bottle of EJ-MIX ?-- It's a heavy PG that doesn't dissolve the extract but suspends it in solution -- U can use this with hash and make good THC e-cig juice !-- It ain't hash oil but works fine !
Where Umbra ?-- See if I told it right ?

View attachment 20180502_161957.jpg
 
Good to know keef! I haven't really looked into procedure yet cuz getting the plates is the hard part for me. Ill get some tho and I want it to be small industrial capable.
At harvest there is usually multiple pounds to deal with and I want to get 're done.
I saw one that had parchment envelopes the rosin flowed into. Got my own press but need heated plates.
 
Nice kit but I don't understand the need for mesh. Splain it to me.
 
Mostly got it for the silicone containers and the tools -- The mesh bags I got after I tried to press some without them !-- They just keep plant matter out the oil -- The EJ Mix wasn't in the kit either but a drop or 2 will thin that oil so it will flow in an e-cig better -- The kit is just for handling and storing the pressed oil !-- It comes off the parchment paper fine after a while in the fridge !---Instead of going on a scavenger hunt for silicone I just got this kit !-- Might be firing up that baseball cap press soon !-- Still need to get me a couple bar clamps !-- No hurry !-- Ain't but up to a 99 year sentence for making an extract in Texas !-- I just read all this out a book !--
 
"keeps the flowers or kief separate from the rosin"

I guess that's right. The kief and tiny plant matter would have a tenancy to follow the rosin.
 
Somebody need to break out the forge and lay hammer to steel and make me something like the old clothes iron U used to heat up on the wood stove before U could use it !-- I just need a flat waffle iron with a screw crank or something out on some tong type handles for pressure -- Put it in da oven and bring it up to heat !-- Take it out and put your little mesh bag parchment paper packet inside and close then twist down on the screw tightened!-- Put it back it the oven for the 5 minutes or so then take the packet out replace it with another and repeat !-- Make me a dam " Little House On the Prairie" Rosen Press !
 
Keef. I tried using an electric frying pan and a huge C clamp but it just didn't do a good job. I'm thinking a good shop press with the heated plates will do a great job.
The links umbra posted have everything ya need to build your own. It Still isn't cheep tho. I bet before squish these parts cost a lot less.
 
Status
Not open for further replies.

Similar threads

pute
Classic Vinyl
2 3 4
Replies
62
Views
3K
Blaze-one
Blaze-one
U
Just tried Old School Haze
2
Replies
21
Views
1K
greenmobster440
greenmobster440
Kindbud
Worst Year Of My Life!
2 3
Replies
56
Views
3K
Bugus_Monkey
Bugus_Monkey
NewbOldster
Sunday Morning Story?
Replies
0
Views
625
NewbOldster
NewbOldster
Joe's grows
I believe cartman needs a big ty at least from jowsgrows!!!!!!
2 3
Replies
45
Views
1K
Carty
Carty

Latest posts

Back
Top