2 nd grow

[george goff]

Dunno squat about vivosun nutrients so I went reading up on some of it.

John mentions dont mix them and there's a reason for that and further explanation. I guess you use both products but can't mix them together before giving it to the plant....

Some copy n paste...
If Part A and Part B are mixed together before being diluted in water, they may react and form compounds not usable by plants. It's best to discard the mixture and start over, ensuring each part is mixed separately with water first.

It's mentioned a couple times...,.
To mix, first, add the dosage of A to your feed water then add the dosage of B. Can I mix Base A and B together before I mix them into the water? No. Base A and B should never be combined in their concentrated form as nutrient lockout will occur.

Weird they would set up a nutrient line like this.

https://www.amazon.com/vdp/00d6796278d44215af9e5af498286618?ref=dp_vse_ibvc0, if i did this right this is the video from vivosun,that shows how to mix them. anyway i take a gallon of ph adjusted water and add part a, and i have a mixer on my cordless drill and mix for 1 to 2 minutes, then i add part b and repeat , then i check the ph and adjust it to 6.5, then i use a 1 oz turkey baster and add 4 oz's to each plant, i try to keep moisture of the plants between 15 to 20 %, and only add nutrients when the ec is below .15 %, which pretty much need raising 1 to 2 times a week, each plant is different so i keep a journal of water % and ec % and only add when the readings change, so i dont over water or add to much nutrients, i have no way of measuring specific % of each nutrient as the labs around here want an arm and leg to do tests, i slurry tested 4 of the plants today and soil ph is right around 6.2 to 6.7,. i'm at a loss as to why 5 maybe 6 of the plants leaves are canoeing, other than that the plants look fine (cant take pictures now, lights are off) i'll take some tomorrow, thanks for the input i really appreciate it, george of the jungle