Island Of Misfits

[ROSTERMAN]

@pute
You sure that engine is a 7hp and not 7.5 hp
I don't remember a 7hp

 

[user 60570]

hey there , what papers do ya all use?

anything new and improved out there?

we like the Elements ok

coffee and cannabis , c99 this morning

 

[ROSTERMAN]

Tons of used and new parts avail on ebay still

 

[ROSTERMAN]

hey there , what papers do ya all use?

anything new and improved out there?

we like the Elements ok

coffee and cannabis , c99 this morning


View attachment 284987

Always the same Best so far

 

[Tattered Old Graywolf]

Ok, you have my attention. If It snag one of these, what do I Do with it? I assume it sucks out the alcohol and reclaims it? Bubba needs skooled... Bubba

I think I need one of these for QWET dealings. Now to read up. How does one utilize this device for "winterizing."

The heated vacuum chamber is used to remove the balance of the butane or alcohol that was used in the extraction process. The solvents boil at lower temperature under vacuum, so are more easily removed.

Winterizing is dissolving BHO or Rosin in ethanol at around 10:1 or greater, and sticking it in a -18C/0F freezer for 24 hours, which causes the non polar plant waxes and lipids to precipitate out of solution, so that they can be then removed by filtration.

It turns a raw extract into an "Absolute" once you have removed the ethanol and there are several ways to do that. I've recovered most of mine in a simple pot still, which are easy to make and readily available on line.

A simple pot still only produces about 130 proof the first run, and requires multiple runs to bump it up to 190 proof, or you can add a reflux column and do it one run.

A reflux column has a packing that cools the vapors as the rise, causing them to recondense and rain back down into the boiler. Once the packing is warmed up, only the lightest vapors reach the top, which are the 190 proof vapors.

I'll come back later with some links, after my web master fixes my Graywolfslair site this morning.

 

[ROSTERMAN]

The heated vacuum chamber is used to remove the balance of the butane or alcohol that was used in the extraction process. The solvents boil at lower temperature under vacuum, so are more easily removed.

Winterizing is dissolving BHO or Rosin in ethanol at around 10:1 or greater, and sticking it in a -18C/0F freezer for 24 hours, which causes the non polar plant waxes and lipids to precipitate out of solution, so that they can be then removed by filtration.

It turns a raw extract into an "Absolute" once you have removed the ethanol and there are several ways to do that. I've recovered most of mine in a simple pot still, which are easy to make and readily available on line.

A simple pot still only produces about 130 proof the first run, and requires multiple runs to bump it up to 190 proof, or you can add a reflux column and do it one run.

A reflux column has a packing that cools the vapors as the rise, causing them to recondense and rain back down into the boiler. Once the packing is warmed up, only the lightest vapors reach the top, which are the 190 proof vapors.

I'll come back later with some links, after my web master fixes my Graywolfslair site this morning.

So will the one I posted work on a beer keg to produce 190 EC

 

[ROSTERMAN]

@Tattered Old Graywolf

 

[Tattered Old Graywolf]

This is a small one I was looking at: https://www.emeraldgoldextractors.c.../dual-digital-control-heat-press-5-x-5-platenBubba

Not good. Look at the rated pressure. 8.12 kG/CM2 = 115 psi.

I was looking at this one.

2000+ PSI Professional Press Hand Crank Dual Heated Plates (2.4" x 4.7")

Visit the GDAE10 Store

3.9 out of 5 stars 56 ratings

Price:

$229.00 & FREE Returns

• ★SPECIFICATION-2.4X4.7 Inch (6X12 cm) with intense pressure and flexible temperature control
• ★EAST TO CLEAN-Non-stick dual heating elements with teflon paint on surface. Dustproof and do not need high temperature cloth. Convenient to clean and oxidation resistant
• ★CUSTOMIZED-Micro processor precision heat and temperature gauge so that you can set your desired pressure, temperature and use the crank to press as hard as you want
• ★HEATING-Electric heat pipe and plate body to pouring into an organic whole for even heating
• ★INTELLIGENT-Firm construction with good quality, durable for years of trouble-free

More like it!

Don't know how much it matters, some are 1 ton, 2 ton, 5 ton and so on. Bubba

Recommendations...

Tonnage depends on plate size. Here are some hydraulic presses to compare it to. Look at the 4 ton press.

https://www.dabpress.com/?msclkid=4...pressing rosin&utm_content=Dabpress-Searching

 

[WeedHopper]

You guys are boring me. Ill be bach.

 

[Tattered Old Graywolf]

Exercise, right diet and EVERYTHING in moderation.

Including moderation.

View attachment 284990
@Tattered Old Graywolf

Like that. The height of the column and type of packing will determine what proof makes it over the top to the condenser. It took me 5 feet of 2" column to reach 190 proof on mine.

https://graywolfslair.com/index.php...uxing-columns-for-producing-190-proof-ethanol

 

[Tattered Old Graywolf]

@pute
I have had nothing cannabis since August. I do, however, have Titos. I dose it.

My latest research shows that alcohol has an immediate antidepressant effect. Just be careful. I only drink clear liquor (titos) and lots of water.

My preference is cannabis, but I have no current access to that. No inertia, how depressing.

Where are you that you can't get cannabis?

Titos in moderation with Lexapro............

 

[WeedHopper]

Okay,,ill try again.

 

[ROSTERMAN]

Including moderation.



Like that. The height of the column and type of packing will determine what proof makes it over the top to the condenser. It took me 5 feet of 2" column to reach 190 proof on mine.

https://graywolfslair.com/index.php...uxing-columns-for-producing-190-proof-ethanol

What are you stuffing in the 2 inch tube?

 

[ROSTERMAN]

Okay,,ill try again.

View attachment 284993View attachment 284994

Is not willing to admit he can only get the chubby gals too
So I have no Respect for you either

 

[ROSTERMAN]

Don't get me started I have a million
Comes from being made fun of as a child

 

[Bubba]

View attachment 284979

Ever here of "Vera Scientific" or some such outfit?

Bubba

 

[Bubba]

hey there , what papers do ya all use?

anything new and improved out there?

we like the Elements ok

coffee and cannabis , c99 this morning


View attachment 284987

I've been stuffing cones lately, looking for some really high quality ones. For all my smoking career, I've used the little square pack of club papers. Very, very thin and no glue. I'm a rolling fool with those. Then they disappeared. Worse, they came back except like typing paper with glue. I think they made some improvement s, IDK.

I still have several packs of them I bought when I saw the handwriting on the wall. On cones, I prefer very very thin rice paper. I have a small metal funnel that just fits in the opening, allows me to stuff them fine. Bought a bunch of RAW, but not rice paper.

Bubba

 

[Tattered Old Graywolf]

What are you stuffing in the 2 inch tube?

I used stainless pot scrubbers bought bulk at a restaurant supply.

 

[ROSTERMAN]

 

[Bubba]

Don't get me started I have a million
Comes from being made fun of as a child
View attachment 284996

Ya Goonie!