hello fellow gardeners.
I had a few questions about DIY systems, and wanted to share this. its a very inexpensive way to make a flood and drain system with built in reservoir. cheap, easy and works like a store bought model.
I did not take these pics, or write the DIY on it, i am sharing it from another site. although, i do have a few i made and can vouch for how well they work.
lets go...
build a homemade mega garden....
Hefty brand...one is a 40qt. that nest perfectly in a 72qt. and provides for a 9gal reservoir under the top tub...
The drain is a 1/2" ID grommet (also at lowes) in a 5/8" hole and 1/2" hose x 1/2" hose hose barb L ......
For input and drain height i used some bulkheads with 3/4 pipe inner threads with a hose barb on bottom of input to connect the pump and the other top fill level overflow tube i used a "cut to length" 3/4 pipe nipple from the irrigation dept.
What really made it impossible to pass up was how the air line and power cord had a ready made place to enter the bottom tub with no extra holes and the top tub would not mash the lines ... where the handles are is a about 3/8ths x 4" recess allowing for enough room for airline to not get pinched.....
the large access port in top tub is a kitchen sink stopper....
I had a few questions about DIY systems, and wanted to share this. its a very inexpensive way to make a flood and drain system with built in reservoir. cheap, easy and works like a store bought model.
I did not take these pics, or write the DIY on it, i am sharing it from another site. although, i do have a few i made and can vouch for how well they work.
lets go...
build a homemade mega garden....
Hefty brand...one is a 40qt. that nest perfectly in a 72qt. and provides for a 9gal reservoir under the top tub...
The drain is a 1/2" ID grommet (also at lowes) in a 5/8" hole and 1/2" hose x 1/2" hose hose barb L ......
For input and drain height i used some bulkheads with 3/4 pipe inner threads with a hose barb on bottom of input to connect the pump and the other top fill level overflow tube i used a "cut to length" 3/4 pipe nipple from the irrigation dept.
What really made it impossible to pass up was how the air line and power cord had a ready made place to enter the bottom tub with no extra holes and the top tub would not mash the lines ... where the handles are is a about 3/8ths x 4" recess allowing for enough room for airline to not get pinched.....
the large access port in top tub is a kitchen sink stopper....