Growdude
I am the Smo King
- Joined
- Oct 25, 2006
- Messages
- 4,692
- Reaction score
- 3,545
Everything is installed now, 2 motorized dampers, overtemp control, PPM-4 controler. No Minigen Co2 burner yet, the sales guy tried them out and said the same thing I did.
What was funny is I got to watch the guy inadvertently fry both of them when he tried a different power pack.
Well anyway I got my Co2 bottle hooked up for now.
Its working quite well, holding the Co2 level well @ 1.5 cubic feet per/hour
it only on for 20 secs maybe twice an hour.
The way the DIY control works is if the temp reaches the setpoint it shuts off the Co2, moves the dampers and exhausts the tent for a set time on the controler, then returns the dampers and releases Co2. The pic shows an empty socket on the din rail, that will be to limit the Co2 only when the lights are on.
So far set at 95 it not even close with the Temps steady at 85.
Heres some pics of it all and the new duct work.
What was funny is I got to watch the guy inadvertently fry both of them when he tried a different power pack.
Well anyway I got my Co2 bottle hooked up for now.
Its working quite well, holding the Co2 level well @ 1.5 cubic feet per/hour
it only on for 20 secs maybe twice an hour.
The way the DIY control works is if the temp reaches the setpoint it shuts off the Co2, moves the dampers and exhausts the tent for a set time on the controler, then returns the dampers and releases Co2. The pic shows an empty socket on the din rail, that will be to limit the Co2 only when the lights are on.
So far set at 95 it not even close with the Temps steady at 85.
Heres some pics of it all and the new duct work.