audix2359
Well-Known Member
- Joined
- Oct 3, 2007
- Messages
- 158
- Reaction score
- 55
This is my 2nd attempt at a grow journal, so here it goes.
I've gone from a plan of a 10 sq ft grow to a micro grow. As I kept scaling down, I kept leaning more and more to LED's, mostly because of the heat issue and because I realized that my space was going to be quite limited.
So, I germed close to 20 seeds about 10 days ago, using cups of distilled water for each strain. All of the seeds cracked in 12 hours so I continued to germ using a paper towel. After 24 hours, most had sprouted.
My container is a 45 gallon Rubbermaid tub. I've seen some people who get 2 of them and stack them but I only have 1. My growing area is 2.3 square feet at the bottom; it's probably closer to 3 square feet as it moves up. The container itself is a little over 4 square feet but some the the room inside is taken up by lights. Temps stay between 72 and 75 and RH stays between 50 and 55%.
All of my germed seeds were placed in 20 oz styrofoam cups with drainage at the bottom. For soil, I used a mix of 25% MG Ogranic (no nutes), 25% perlite/vermiculite, 25% Jiffy Mix (mostly sphangum moss) and 25% mushroom compost. I planted my seeds 1 week ago and due to some circumstances, they were without light for 2 days. When I got them under some light, most had broken soil and were really streched.
My current light set up is all LED's. Right now I have 7 large LED bulbs with mixed colors (168 LED's per bulb) and 9 small LED bulbs with mixed colors (66 LED's per bulb) shining on my plants. I have a total of 1770 LED's using 136 watts of power. I have 8 LED's mounted to the lid of the container and
8 LED's in desk lamps providing some close up light to the plants.
As of today, I have the following plants:
3 White Widow
3 Big Bud
3 Speed Queen
3 Ice
2 Magic Bud
I tried to germinate some Crystal seeds but only 2 sprouted and out of those 2, neither broke the soil. Since I'm going to be removing a lot of plants anyway, I tossed those already.
Thanks to 85Cannabliss, I decided that I'll run some string or wire across the top of the inside of the container and train the plants to grow along that - kind of like a ScrOG with less plants. I also want the plants small so I started no 12/12 from seed (aside from the few days of darkness they had).
I'm hoping to keep 1 female per strain and get as much bud as possible. I have 1 additional, smaller Rubbermaid container that I might be able to get a plant or two into. I'm considering purchasing a small wattage HPS security lamp and rigging it up in the small container so I can keep a few more plants - we'll see.
The photos below are as follows:
Pic #1, A White Widow plant that broke the soil in darkness. This was taken after about 48 hours in the dark.
#2, The same Widow (I think), after 4 days under LED's.
#3, One of my Ice plants.
#4, One of my Speed Queen plants.
#'s 5 &6, Some group shots in the bin.
#6, a photo with the lid on.
Any advice, pointers, etc would be great. I'll take all I can get but if you've grown with LED's or done 12/12 from seed, please help me along!
I've gone from a plan of a 10 sq ft grow to a micro grow. As I kept scaling down, I kept leaning more and more to LED's, mostly because of the heat issue and because I realized that my space was going to be quite limited.
So, I germed close to 20 seeds about 10 days ago, using cups of distilled water for each strain. All of the seeds cracked in 12 hours so I continued to germ using a paper towel. After 24 hours, most had sprouted.
My container is a 45 gallon Rubbermaid tub. I've seen some people who get 2 of them and stack them but I only have 1. My growing area is 2.3 square feet at the bottom; it's probably closer to 3 square feet as it moves up. The container itself is a little over 4 square feet but some the the room inside is taken up by lights. Temps stay between 72 and 75 and RH stays between 50 and 55%.
All of my germed seeds were placed in 20 oz styrofoam cups with drainage at the bottom. For soil, I used a mix of 25% MG Ogranic (no nutes), 25% perlite/vermiculite, 25% Jiffy Mix (mostly sphangum moss) and 25% mushroom compost. I planted my seeds 1 week ago and due to some circumstances, they were without light for 2 days. When I got them under some light, most had broken soil and were really streched.
My current light set up is all LED's. Right now I have 7 large LED bulbs with mixed colors (168 LED's per bulb) and 9 small LED bulbs with mixed colors (66 LED's per bulb) shining on my plants. I have a total of 1770 LED's using 136 watts of power. I have 8 LED's mounted to the lid of the container and
8 LED's in desk lamps providing some close up light to the plants.
As of today, I have the following plants:
3 White Widow
3 Big Bud
3 Speed Queen
3 Ice
2 Magic Bud
I tried to germinate some Crystal seeds but only 2 sprouted and out of those 2, neither broke the soil. Since I'm going to be removing a lot of plants anyway, I tossed those already.
Thanks to 85Cannabliss, I decided that I'll run some string or wire across the top of the inside of the container and train the plants to grow along that - kind of like a ScrOG with less plants. I also want the plants small so I started no 12/12 from seed (aside from the few days of darkness they had).
I'm hoping to keep 1 female per strain and get as much bud as possible. I have 1 additional, smaller Rubbermaid container that I might be able to get a plant or two into. I'm considering purchasing a small wattage HPS security lamp and rigging it up in the small container so I can keep a few more plants - we'll see.
The photos below are as follows:
Pic #1, A White Widow plant that broke the soil in darkness. This was taken after about 48 hours in the dark.
#2, The same Widow (I think), after 4 days under LED's.
#3, One of my Ice plants.
#4, One of my Speed Queen plants.
#'s 5 &6, Some group shots in the bin.
#6, a photo with the lid on.
Any advice, pointers, etc would be great. I'll take all I can get but if you've grown with LED's or done 12/12 from seed, please help me along!