Whats Wrong with my Plant?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jopake21

New Member
Joined
Jan 30, 2013
Messages
3
Reaction score
0
Hey guys, Ive been growing for about 2 years. Me and my roomate have just started hydroponically and so far everythings going well ive done tons of research and am still doing so day and night. But my white widow has all of a sudden just started dying and yellowing up terribly, i took a pic to my local hydroshop and med shop and they said theyve never seen anything like it but i was almost sure it was a defficiency but its just getting worse.Also it honestly looks so much worse in person than in person, the colas are slouched now and just ****** in general. The only thing i dont get is why thats my only plant doing that i have 4 more in the same resevoir and they're doing great! Any suggestions would be appreciated. Thanks!

whte wdw.jpg
 
We need more info. What type of hydro are you running? What are you feeding it? What are your ppms? What is your pH running?
 
yeah more infor.....my shot in dark is ...its not getting what the others are....if this is drip system than maybe a line is clogged..maybe an air stone not working..Best of luck....and I wouldnt trust anything a med shop or grow shop would say...of coarse they never seen anything like that...lol...they grow veggies:p


take care and be safe
 
My ph is 6.0 so that shouldnt be a problem, uhhh lets see im using the floraduo series and added cali-magic just a few days ago, the water temp is room temp and im leaning towards root rot but any suggestions on how to make it better because another plants dying, i rewashed my whole bubbleponics DWC system last night got all of the excess salts off any debris etc. i reset the nutrients a little lower than normal considering theyr in a delicate state but any quick advice on getting rid of root rot fast, get at me, thanks!!
 
copied and pasted...hope this helps..Im a dirt farmer..

COMBATING EXISTING ROOT ROT:

If you have some grungy roots on established plants, then I'd go with 1/2 cup of hydrogen peroxide (3 - 4% strength) per gallon in a full reservoir. Plan on changing the res every 4 or 5 days until the problem is under control.

The peroxide will kill the bacteria, and make a mess of your reservoir if the problem is progressed, so the increased res changes are important to keep things clean. There are no guarantee's when it comes to rootrot problems that are very progressed.

You can repeat this process until you see some new white roots developing, then keep up the 1/2 cup per gallon for the rest of the life of these particular plants.

During this intense method, I'd drop your nutrients down to half of what you were using before until the plants show healthy new growth.

You should also discontinue the use of any 'live' innoculants (products that are alive like Subculture, or any mycchorizal fungus) while you're taking this approach, as the peroxide will just kill them off.

The peroxide will kill the bad bacteria, but if the problem is too far gone, then the plants are already stressed, and the peroxide may further stress them, but we have had very positive results with this approach where nothing else will work though.

We've got several 'zyme' type products that are designed to be used with the peroxide to 'eat' up the dead root tissue. They work incredibly well, but are pretty expensive products. You don't absolutely have to use the zyme products to have the peroxide work, but it really helps keep the roots healthy and clean if you've got a severe problem. Some of these products are: Hygrozyme, Power Zyme, and Prozyme.

The 1/2 cup recommendation is half of what some of our customers run. You may need to add more to get rid of a bad problem, up to 1 cup per gallon. All of these recommendations are based on 'off the shelf' hydrogen peroxide, which is 3 - 4% strength.

ROOT ROT PREVENTION:

If you're just starting out with a new or sterilized reservoir, and new plants (no rot), then I'd start a program of one tablespoon hydrogen peroxide (3 - 4% strength) per gallon, and re-add the same every 5 days.

The peroxide dissipates, and is basically gone after 4 or 5 days, so re-adding it is important.

Change the reservoir as you normally would.

As an added bonus, the peroxide also helps oxygenate the nutrient solution and your plants will love it.



take care and be safe
 
A ph of 6 in hydro is high...you are right at the point of locking out several nutrients. You want your ph lower and than you can let it gradually rise towards 6 before you lower it again. Jmo
 
Hamster Lewis said:
A ph of 6 in hydro is high...you are right at the point of locking out several nutrients. You want your ph lower and than you can let it gradually rise towards 6 before you lower it again. Jmo

:goodposting: yeah, ur sweet spot is right around 5.8
 
what nutrients would you recommend for a hydro setup,ph. for yours, etc. i woul dreally appreciate it my harvest is vital for me to pay my house bills :[
 
the GH 3 part is a good nute line. me personally i like to run jungle juice 3part from advanced nutrients, mostly b/c constantly phing your res can be a pain in the arse. advanced nutrients automatically adjust the ph of your res to right around 5.8. i find this to be very useful
 
I run General Hydroponics 3 part in soil and when I occasionally run hydro. It is cheap, easy to use and gets real good results. Oh and by the way....I start with my tap water which is usually around 7.5-7.8 and after adding the GH nutrients it is buffered to 5.7-5.8 which is perfect for hydro without needing to adjust the ph.
 
I noticed that you said your water temps are the same as the air temps. If thats the case then either the air is too cool or the water is too warm. Its best to keep the air in the mid 70s and water in the mid 60s. If your water is too warm, I believe that will cause the root rot issue. :)
 

Latest posts

Back
Top